Abrasive Profile Comparative Chart

Chart used for approximating the abrasive size required to obtain a specified anchor pattern

Coating Coverage Calculations

Theoretical coverage, practical coverage, consumption, film thickness, percent solids by volume and wet film thickness adjustment

Commonly Used Formulas

Commonly used formulas for calculating surface area

Conversion Factors

Conversion factors for length, area, volume, area/volume, weight, pressure, film thickness, and temperature

Dew Points (Centigrade)

Dew point calculation chart in centigrade

Dew Points (Fahrenheit)

Dew point calculation chart in Fahrenheit

Drum Measurement

Dew point calculation chart in Fahrenheit

Fractions

Decimal and metric equivalents of fractions

Heat Calculation Chart

Heat Calculation Chart

Hose Pressure
A table illustrating the incremental pressure loss in a hose
Pipe Measurements
Surface area and square feet per linear foot of pipe
Reduction Guidelines
Volume of thinner required to reduce a product in incremental percentages
Reduction in Solids Content
Table illustrating the reduction in solids content by percentage of thinner added
Square Footage Formulas
Formulas and methods for estimating the square footage of various shapes
Surface Preparation Standards
Overview of SSPC and NACE surface preparation standards
Tank Size Estimation
Formulas and example for estimating the square footage of a tank
Tank Ventilation
Illustrations of the various fan arrangements designed to ensure proper circulation of air and removal of combustible or toxic gases
Tank Ventilation Formulas
A table outlining the various factors affecting tank ventilation and their effects on ventilation requirements
Theoretical Coverage (microns)
Theoretical coverage in square meters per liter in microns
Theoretical Coverage (mils)
Theoretical coverage in square feet per U.S. gallon in mils
Wet Film Thickness (microns)
Required wet film thickness to achieve the desired dry film thickness, in microns
Wet Film Thickness (mils)
Required wet film thickness to achieve the desired dry film thickness, in mils