Products by Category:

Tank Linings, Secondary Containment

Steel-Seam FT910

STEEL-SEAM FT910 EPOXY PATCHING AND SURFACING COMPOUND is a 100% solids epoxy surfacing compound for steel or patching compound for concrete. It is formulated for ease of application with squeegee or trowel on horizontal, vertical or overhead applications.

  • 100% solids, zero VOC
  • Tolerates moisture during cure
  • Outstanding workability
  • Easy to use
  • May be applied from 5 mils to 1/2" wft/dft vertically
  • May be applied up to 1" thick with aggregate addition

Recommended Usage

May be used as a versatile filler/surfacer for uneven surfaces found in formed, open or corroded concrete and masonry surfaces. May also be used as a fairing compound for weld seams, riveted connections, lap seams and chine angels in steel tanks prior to epoxy coating and lining applications. Concrete Uses:

  • To smooth rough concrete
  • To fill bugholes, tie rod holes, cavities, honeycombs and other surface defects on horizontal, vertical, or overhead surfaces
  • To form transition coves at vertical and horizontal coves Steel Uses
  • To smooth riveted, lapped or welded seams
  • To fill corrosion pits on steel surfaces TRM.67 Abrasion Resistance Method: ASTM D4060 Result: 0.1 grams lost Adhesion: Method: Concrete, ASTM D4541 Result: 350 psi, 100% concrete failure Method: Steel, ASTM D1002 Result: 1,200 psi Flammability Method: ASTM D635 Result: Self-extinguishing Hardness, Shore D: Method: ASTM D2240 Result: 65-70 Tensile Strength: Method: ASTM D412 Result: 2,300 psi Thermal Cycling Method: ASTM C884, 24 hrs, -21 C to 25° C Result: No cracking
  • To form chine coves and fill sharp angles
Product Number Product Name GHS SDS Data Page
B58W910 White Part A GHS SDS  |  Data Page
B58V910 Black Part B GHS SDS  |  Data Page