Products by Category:

Zinc Rich

Zinc Clad II Plus

ZINC CLAD II PLUS is a solvent-based, three component, inorganic ethyl silicate, zinc rich coating. This is fast drying, high solids, low VOC coating with 82%, by weight, of zinc dust in the dry film.

  • Coating self-heals to resume protection if damaged
  • Provides cathodic/sacrificial protection by the same mechanism as galvanizing
  • Forms an inorganic barrier to moisture and solvents
  • Meets Class B requirements for Slip Coefficient and Creep Resistance, 0.67
  • Meets AASHTO M-300 specification

Recommended Usage

For use over prepared blasted steel and galvanized steel in areas such as:

  • Bridges
  • Refineries
  • Shop or field application
  • Drilling rigs
  • As a one-coat maintenance coating or as a permanent primer for severe corrosive environments (pH range 5-9)
  • Ideal for application at low temperatures or service at high temperatures and/or humidity conditions
  • Fresh and demineralized water immersion service (non-potable)
  • Compliance with Class B Slip Coefficient rating when used

alone or as part of a system with Steel Spec Epoxy Primer as a topcoat

Product Number Product Name GHS SDS Data Page
B69VZ12 Gray Green Part A GHS SDS  |  Data Page
B69VZ13 Accelerator Part B GHS SDS  |  Data Page
B69D11 Zinc Dust Part F GHS SDS  |  Data Page