Products by Category:


COROTHANE I GALVAPAC 2K 100 two pack zinc primer

COROTHANE I GALVAPAC 2K 100 is a two component, moisture curing urethane zinc-rich primer designed for low temperature application to blast cleaned or power tool cleaned steel surfaces.

  • Meets Class B requirements for Slip Coefficient and Creep Resistance,.50
  • Low temperature application - down to 20°F
  • Easy to apply and recoat
  • Resistant to mudcracking
  • Abrasion and chemical resistant

Recommended Usage

  • Immersion Service - potable water: Meets NSF Standard 61 for use in potable water storage.
  • 4,000 gallon minimum topcoated - dependent upon topcoat tank size restriction
  • Meets requirements of SSPC Paint Spec No. 40 for zinc rich moisture cure urethane primer
  • As a primer in a urethane coating system for bridges, tanks, chemical, and marine structures
  • Ideal for priming water assisted abrasive blasted surfaces where flash rusting or blooming limits the use of conventional zinc rich coatings
  • Acceptable for use with cathodic protection with select topcoats
  • Conforms to AWWA D102 Inside Coating System #3 (ICS-3), Inside Coating System #5 (ICS-5), Outside Coating System #2 (OCS-2), Outside Coating System #3 (OCS-3), Outside Coating System #4 (OCS-4), and Outside Coating System #6 (OCS-6)
  • A component of INFINITANK
  • Approved with FIRETEX hydrocarbon coatings
Product Number Product Name GHS SDS Data Page
B65G00018 Green Part A Binder Resin Moisture cure GHS SDS  |  Data Page
B69D00011 Part F Zinc Dust GHS SDS  |  Data Page