News & Events
Browse through the articles below to learn more about products, innovations, and contributions we are making to the protective and marine coatings industry.
Sherwin-Williams Launches Water-based Solution For Concrete And Masonry Resurfacing In Industrial, Commercial, And Architectural Applications
Dura-Plate® 2300 provides cost-effective, three-component kit for cementitious resurfacing
CLEVELAND, OHIO (November 18, 2015) – Sherwin-Williams Protective & Marine Coatings announces the launch of Dura-Plate® 2300, an epoxy-modified cementitious resurfacer for patching and filling voids and bugholes in concrete and masonry structures. Dura-Plate® 2300 provides a hard, durable surface with excellent adhesion that minimizes the potential for pin-holing and outgassing problems typically associated with coating concrete.
The abrasion-resistant coating is part of a complete three-component kit from Sherwin-Williams that contains Portland cement, hydrophobic thixotropes, fiber reinforcement, graded silica sand and other aggregates. It contains the Part A Epoxy, Part B Hardener, and Part C Mortar in a single packaged solution that makes ordering simple, while saving time with processing and application on the job.
“Dura-Plate 2300 is the perfect alternative to the high cost of epoxy resin fillers and the curing restrictions associated with cementitious resurfacers,” said Kevin Morris, Water and Wastewater Market Director, Sherwin-Williams Protective & Marine Coatings.
With a wide range of application temperatures, the product allows for a longer season for application. Its unlimited recoat window accommodates any project demands, as it can be reagitated to reduce viscosity and improve workability time inside of its lengthy 70-minute pot life.
Dura-Plate 2300 can be dry to touch in three to four hours and cures for immersion in 12 hours at 75° F. The product can be applied at a minimum of 40° F. Without the need for heated cure in colder temperatures and moist curing in hot environments, Dura-Plate 2300 prevents the application and curing restrictions associated with cementitious repair mortars.
Available in flat concrete gray, Dura-Plate 2300 can be applied via hand trowel or spray at package consistency and it releases easily from the trowel to reduce worker fatigue. The addition of potable water can aid in spray application characteristics.
“With concrete being the most commonly used construction material in the world and knowing that concrete commonly experiences placement defects, Dura-Plate 2300 provides an easy and economical solution for resurfacing,” Morris said.
The Sherwin-Williams Dura-Plate 2300 resurfacer has an excellent film build up to ½" thickness per lift and it can be top-coated in eight hours with nonflake-filled coatings and 24 hours with flake-filled coatings.
Dura-Plate 2300 is suited for resurfacing concrete prior to coating and lining applications for a wide range of environments, including water and wastewater facilities, the oil and gas industry, pharmaceutical facilities, bridge and highway, food and beverage sites, power generation facilities, mining, sewer collection, atmospheric and immersion service, and secondary containment.
Sherwin-Williams is a global protective and marine coatings company that delivers smarter asset protection and unmatched service and specification support to its customers from over 4,000 locations worldwide. From alkyds to zincs, the company offers a complete line of time-tested, high-performance coatings and systems to combat corrosion, supported by the largest group of NACE-certified coatings inspectors in the industry. With nearly 150 years in business and a culture of product innovation, Sherwin-Williams today is the single source of supply for coatings solutions made to your specifications and delivered on time, every time.
Editor contact, Scott Hunsberger, 216-292-4700, email@example.com
Customer contact: 800-524-5979