Products by Category:
Marine & Specialty Coatings
Euronavy ES301S Epoxy
EURONAVY ES301S is a solvent-free, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions. ES301S provides chemical and abrasion resistance and very good edge-retentive properties. It can be applied over steel prepared by hydroblasting, grit blasting or mechanical tooling.
- Superior impact resistance
- Good chemical resistance
- No Dew Point or relative humidity restrictions
- Excellent anticorrosive properties
- Can be applied on vessels while on the water
EURONAVY ES301S is an anticorrosive coating for long service life steel protection, normally used as an intermediate or topcoat as part of a ES301 based coating system when very high edge retentive is required (assuring high film thickness over welds and at sharp edges). It can be used for both immersion and above waterline service in marine, offshore, construction and industrial applications. It is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges.