Products by Category:

Marine & Specialty Coatings

SeaGuard 6000 - Marine Epoxy

SeaGuard 6000 Marine Epoxy is a modified epoxy phenalkamine, formulated specifically for immersion and atmospheric service in marine and industrial environments. SeaGuard 6000 is a versatile anti-corrosive coating that can be applied at temperatures as low as 20°F.

  • Complies with IMO Performance Standard for Protective Coatings SOLAS REGULATIONS II-1/3-2 and XII/6.3
  • Self-priming
  • Low temperature application
  • Surface tolerant - damp surfaces
  • Provides salt water and fresh water immersion resistance

Recommended Usage

For use over properly prepared steel substrates, including:

  • Salt water and fresh water immersion service
  • Ballast tanks
  • Offshore and marine structures
  • Bilges and wet void areas
  • Decks and superstructures
  • Underwater hulls
  • Fabrication and new construction
  • Maintenance and repair
  • As an anti-corrosive primer when used as part of an underwater

hull system with anti-fouling coatings

Resources
Product Number Product Name MSDS GHS SDS Data Page
N11A400 Gray Part A MSDS  |  GHS SDS  | Data Page
N11B400 Black Part A MSDS  |  GHS SDS  | Data Page
N11R400 Red Part A MSDS  |  GHS SDS  | Data Page
N11W400 White Part A MSDS  |  GHS SDS  | Data Page
N11V400 Hardener Part B MSDS  |  GHS SDS  | Data Page