Products by Category:

Marine & Specialty Coatings

Fast Clad ER

FAST CLAD ER Epoxy is an edge retentive, ultra high solids epoxy amine coating engineered for immersion service in sea water ballast tanks, fuel/sea water ballast tanks, and petroleum storage tanks. The rapid return to service and high build, edge retentive properties of this coating provide superior protection compared to conventional epoxies.

  • One coat protection • Fast return to service
  • Low VOC
  • Low odor
  • Dry to walk-on within four hours
  • Designed for plural-component application equipment
  • Greater than 70% edge build retention

Recommended Usage

For use over prepared steel or masonry surfaces in industrial and marine exposures such as:

  • Ballast tank interiors and oil storage tank interiors
  • Fuel storage tanks and external pipeline coating
  • Primary or Secondary containment
  • Acceptable for use with cathodic protection systems
  • Where rapid return to service and edge protection film build properties are required
  • Meets Mil-PRF-23236C, type VII, class 5&7, Grade C requirements for seawater ballast and jet fuel tanks.
  • Blue OAP contains fluorescent pigments

Resources
Product Number Product Name GHS SDS Data Page
B62W230 White Part A GHS SDS  |  Data Page
B62L230 Blue w/OAP Additive Part A GHS SDS  |  Data Page
B62V230 Hardener Part B GHS SDS  |  Data Page