Products by Category:

Tank Linings, Secondary Containment

Dura-Plate UHS Primer

DURA-PLATE UHS PRIMER is an ultra high solids epoxy amine formulated specifically as a primer for use under Dura-Plate UHS topcoat. For use in immersion service in ballast tanks, oil tanks, and refined fuel storage tanks. Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces.

  • Airless Spray
  • Low VOC
  • Low odor
  • High flash point, >200°F
  • Low Temperature Hardener for applications from 40°F to 77°F.
  • NSF approved to Standard 61 for potable water (tanks of 1000

gallons or greater and pipes of 40" diameter or greater.)

Recommended Usage

For use over prepared steel or concrete surfaces in industrial and marine exposures such as:

  • Meets Mil-PRF-23236C, Type VII, Class 5, 7, Grade C
  • Ballast tank interiors
  • Potable water tanks and pipes
  • Oil storage tank interiors, and refined fuel storage tank interiors
  • Water and waste treatment plants
  • Containment areas
  • Suitable for use with cathodic protection systems
  • Conforms to AWWA D102, ICS #1, ICS#2, OCS#5
  • B62L210 Blue contains OAP fluorescent pigment (NSF Approved)
Resources
Product Number Product Name MSDS GHS SDS Data Page
B62H210 Primer - Gold Part A MSDS  |  GHS SDS  | Data Page
B62L210 Primer - Blue (with OAP additive) NSF Part A MSDS  |  GHS SDS  | Data Page
B62V210 Hardener Clear Part B MSDS  |  GHS SDS  | Data Page
B62V211 Low Temp Hard Clear Part B MSDS  |  GHS SDS  | Data Page