Products by Category:

Tank Linings, Secondary Containment

ExpressCote HCR

ExpressCote HCR is a glass flake filled epoxy novolac lining engineered to protect concrete and steel tank interiors from chemicals and solvents at ambient and elevated temperatures. It provides rapid return to service, high film build, and edge retentive protection compared to conventional epoxies.

  • Fast return to service
  • One coat protection.
  • Edge Retention > 70%
  • 5 hours dry to walk on @ 77° F
  • 24 hours return to service @ 77° F
  • Designed for plural-component application equipment.
  • 100 % Solids- Zero VOC
  • Product contains Opti-Check OAP pigment technology for rapid

holiday detection with safe blue light inspection lamps

Recommended Usage

For use over prepared concrete and steel in the following industrial and marine exposures:

  • Petrochemical storage tanks and piping
  • Trenches, troughs, sumps, pits
  • Ballast tanks interiors and crude oil storage tank interiors
  • Water and waste water facilities
  • Where rapid return to service is required.
  • Meets performance requirements of Mil-PRF-23236C
  • Chemical Holding Tanks (CHT)
  • Well deck overheads
  • Concrete, Primary and Secondary Containment
  • Power plant FGD duct and tanks
Resources
Product Number Product Name MSDS GHS SDS Data Page
B62W250 Off White Part A MSDS  |  GHS SDS  | Data Page
B62V250 Hardener Part B MSDS  |  GHS SDS  | Data Page