Products by Category:

Tank Linings, Secondary Containment

Shelcote II Flake Filled Epoxy

SHELCOTE II FLAKE FILLED is a high-solids, amine cured epoxy with micaceous iron oxide. Designed for use as part of a system for internal tank linings and a wide range of industrial applications. Low temperature hardener available for applications from 35°F minimum to 80°F maximum. The micaceous iron oxide provides:

  • Improved abrasion and blister resistance
  • Lower moisture vapor transmission
  • Film reinforcement
  • Higher temperature resistance
  • Improved edge protection

Recommended Usage

Designed as part of a system to improve performance in immersion service compared to non-micaceous iron oxide filled coatings. Internal tank lining for products such as

  • Crude oil
  • Unleaded gasoline
  • Wastewater
  • Motor fuels
  • Alkalies
  • Brines
  • Most aromatic solvents

Part of a coatings system for secondary containment applications. Low temperature hardener not recommended for use at application temperatures above 80°F. Acceptable for use with cathodic protection systems.

Resources
Product Number Product Name MSDS GHS SDS Data Page
CK920R355 Reddish/Gray Part A MSDS  |  GHS SDS  | Data Page
CK700C764 Hardener Part B MSDS  |  GHS SDS  | Data Page
CK700C826 Low Temp Hardener Part B MSDS  |  GHS SDS  | Data Page