Products by Category:

Epoxy

Sher-Glass - Glass Flake Epoxy

Sher-Glass - Glass Flake Epoxy

SHER-GLASS FF is a glass flake reinforced amine epoxy coating formulated for immersion service or where steel or concrete protection is desired, in a wide range of harsh industrial environments.

  • The use of pre-wetted glass flake allows for consistent mixing and application
  • Re-inforced film enhances performance and edge protection
  • Excellent immersion service performance
  • Corrosion resistant
  • Direct to metal application for tanks and structural steel
  • Up to 20.0 mils dry in a single coat

Recommended Usage

For use over prepared steel or concrete in the following environments:

  • Petro-chemical
  • Immersion in fresh or salt water
  • Water and waste water facilities
  • Marine - ships, barges, and offshore structures
  • High humidity and moisture areas
  • May be used in non-immersion areas where abrasive blasting is impractical or impossible
  • Areas requiring good chemical resistance to splash, spillage,

and fumes

Resources
Product Number Product Name MSDS Data Page
B62R525 Red Oxide Part A MSDS  | Data Page
B62B525 Black Part A MSDS  | Data Page
B62A525 Haze Gray Part A MSDS  | Data Page
B62V525 Standard Hardner Part A MSDS  | Data Page
B62V526 Low Temp Hardener Part B MSDS  | Data Page