Products by Category:

Polyurethane

Corothane I - GalvaPac Zinc Primer 2K

COROTHANE I GALVAPAC TWO PACK ZINC PRIMER is a two component, VOC compliant, moisture curing urethane zincrich primer that contains micaceous iron oxide, designed for low temperature application to blast cleaned or power tool cleaned steel surfaces.

  • Low temperature application - down to 20°F
  • Easy to apply and recoat
  • Resistant to mudcracking
  • Abrasion and chemical resistant
  • Meets Class B requirements for Slip Coefficient and Creep

Resistance, .54

Recommended Usage

  • Immersion Service - potable water: Meets NSF Standard 61 for use in potable water storage.
  • 250,000 gallon untopcoated
  • 20,000 gallon minimum topcoated
  • Meets performance requirements of SSPC Paint Spec No. 40 for zinc rich moisture cure Polyurethane primer
  • As a primer in a urethane coating system for bridges, tanks, chemical, and marine structures
  • Ideal for priming water assisted abrasive blasted surfaces where flash rusting or blooming limits the use of conventional zinc rich coatings
  • Acceptable for use with cathodic protection with select topcoats
  • Conforms to AWWA D102 Inside Coating System #5 (ICS-

5), Outside Coating System #6 (OCS-6)

Resources
Product Number Product Name GHS SDS Data Page
B65G10 Green Gray Part A GHS SDS  |  Data Page
B69D210 Zinc Dust Part F GHS SDS  |  Data Page